1. Voltage: USB3.0 5V/1.5A (connected to the console via accessory USB cable)
2. Current: Maximum charging current is up to 800mA in the case of charging a single original PS4 controller;the maximum charging current is 420MA for either of the two original PS Move controllers being charged at the same time (fans are off);
3. Charging time: The original PS4 controller can be fully charged in 2.5 to 3 hours, while it takes about 3.5 to 4 hours to fully charge the original PS Move controller;
4. Maximum fan speed: 5000±10% RPM; Maximum air volume: 12.6 CFM.
5. Material: ABS
6. Accessory: USB cable.
How to Use:
1. Put this product horizontally, with the Micro USB side upward, and place the PS4 console
vertically on the fan stand (If the PS4 Slim console needs to be fixed with accessory screws,
invert the PS4 console for installation, and then screw it tight with the accessory nuts).
2. The toggle switch in the front is used to control the built-in fan: "OFF" means turning off the
cooling fan; "L" means low speed, and H means high speed.
3. Use the slot on the left to store the PS VR converter and relevant cable.
4. Use the single charger on the right of the stand for charging the PS controller.
1× Multi-functional PS Showcase Stand
1× USB cable